Philips SE7452B-37 - Manual (Page 32)

30 Advanced settings
8 Advanced settings
8.1 Change Recall time
Recall time (or dial delay) is the time delay by
which the line will be disconnected after you
press
r
key. It can be set to short, medium or
long.
The default value of recall time that is preset in
your handset should be the best suited for your
country network and therefore you should not
need to change it.
Note
This setting is useful when using network
services. The use of some services accessed with
[
r
+
1
] , [
r
+
2
] , [
r
+
3
] (call
waiting, call forward...) will depend on your recall
time setting. Please contact your network
provider for more details on this feature.
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, press
m
SELECT to enter Recall Time .
Scroll
:
to Short , Medium or Long and press
m
SELECT to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
8.2 Change the Dial Mode
The default value for dial mode that is preset in
your handset should be the best suited for your
country network and therefore you should not
need to change it.
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, scroll
:
to Dial Mode and press
m
SELECT.
Scroll
:
to Tone or Pulse and press
m
SELECT to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
8.3 Set Area Code
This feature is useful when you have subscribed
to Caller Line Identification service. It allows you
to set an area code in your SE745. Once the local
area code is set, the phone automatically filters
the area code for all incoming calls, by removing
the area code for local calls and retaining the area
code for calls from other areas.
If it is a local call, then only the phone number of
the caller is displayed during an incoming call or
when you call the number from the call log. If it is
a long distance call, then both the area code and
phone number will be displayed in a proper
format to be dialled out directly from the call log,
or saved into the phonebook.
Note
You can enter a maximum of 4 digits for the area
code.
You need to subscribe to Caller Line
Identification service to be able to see the caller’s
number or name in the call log. See “Using the
Call log” on page 23 for details.
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, scroll
:
to Area Code and press
m
SELECT.
Enter the local area code (maximum 4 digits)
and press
m
OK to save.
• A validation tone is emitted and the screen
returns to previous menu.
8.4 Call Barring
Call barring enables you to restrict selected
handsets from dialling a phone number beginning
with certain digits. You can set up to 4 different
barring numbers, with each number containing up
to 4 digits.
8.4.1 To activate/deactivate Call Barring
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, scroll
:
to Call Barring and press
m
SELECT.
Enter the Master PIN when prompted and
press
m
OK to confirm.
Note
By default, the Master PIN is 0000.
Press
m
SELECT to enter Barring Mode .
Scroll
:
to On or Off and press
m
SELECT to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
1
2
1
2
1
2
1
2
3
4