Philips 42PF9630A-37 - Manual (Page 44)

42
To put the remote control function buttons back to the factory mode
& Press the SELECT button repeatedly to select TV mode.
é Press the OK button and the MUTE button simultaneously for at least 5 seconds.
All the SELECT LEDS will light up.
“ Press the SELECT button
• 1x: DVD/R is lit up
• 2x: CBL is lit up
• 3x: VCR is lit up
• 4x: AUX is lit up
• 5x: DVD/R , CBL , VCR , AUX are lit up.
‘ Press the OK button when one or all mode LEDS are lit.
The function buttons which were ‘learned’ will be erased or from the selected destination source or from all the external devices at
once.
All the buttons from the TV remote control will have their factory function again.