Philips 42PF9630A-37 - Manual (Page 8)

6
.@
TUV PQRS WXYZ
JKL GHI MNO
ABC DEF
✓
MODE ON/OFF Ambilight
+
-
+
-
DVD/R CBL TV VCR AUX
PIP MENU
1 2 3
4 5 6
7 8 9
0
Ò ® ‡
π
º
†
®
®
® ®
A/CH
VIEW
- FAVORITES -
FORMAT
INFO
SELECT GUIDE
DEMO CLOCK
MY CONTENT
VOL
CH/
PAGE
MUTE
AV+ -
POWER
SCREEN
OK
=
_-
SWIVEL
POWER
Press to turn on/off the TV from or to
standby mode.
The TV is never powered off completely
unless it is physically unplugged.
Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed
automatically after 6 seconds or press
OK to remove immediately.
DVD/R CBL TV VCR AUX
Press the SELECT button repeatedly
to select one of the system modes in
which the remote control can be used.
If no action is being undertaken within
60 seconds, the remote control
returns to TV mode.
After an action in the selected system
mode the remote control will remain
in this mode for 60 seconds and will
then return to TV mode.
A/CH
Press to alternate between the
currently viewed channel and the
previously viewed channel.
DEMO Demo on/off
See p. 9.
CLOCK on/off
Time display (for max. 10 minutes)
Color buttons
When functions are attached to the
color buttons, the color buttons are
shown on screen.
= MY CONTENT
Press to display the My Content menu
on or off, see p. 5.
SWIVEL no function
OK - to activate a setting
- to display the list of channels stored
(according to the selection made in
the Installation mode - Antenna or
Cable, p. 10.)
- starts playing content in the Home
Network Browser application, p. 28.
MENU Settings menu on/off. See p. 9.
VOL Volume
Press + or - to adjust the volume.
MUTE
Interrupt the sound or restore it.
GUIDE no function
INFO
Display information: Press to display
(when available) information about the
selected TV channel and program or
accessory device.
Cursor buttons
Press the cursor buttons up/down,
left/right to navigate through the
menus.
Note: If necessary, you can adjust the
picture position to the center of the screen
with the cursor keys.
PIP HDMI Dual screen/PIP See p. 12.
To watch a broadcast and a HDMI
source simultaneously.
CH/PAGE Channel selection
- To browse through the TV channels or
sources stored in the preferred
channel list (see p. 26).
- To select between Antenna or Cable
TV channels, first make your selection
in the Settings menu, see p. 10.
Note:You don’t have to start the
installation again once you have searched
for and stored the available TV channels.
AV + Press repeatedly to select AV1 , AV2 ,
AV3 , HDMI1 , HDMI2 , Side or TV
channels when in TV mode, according
to where you connected the accessory
devices (p. 37).
Alphanumeric buttons
To select a TV channel. See p. 8.
- Type the dash (-) for digital channels.
Use of the remote control RC4318