Philips LCD TV 46PFL7505D 117cm-46" class Full HD 1080p digital TV with Perfect Pixel HD Engine - Manual (Page 15)

14
Lock or unlock your device from the home menu
This section describes how to lock or unlock specifi ed device.
1
Press MENU on the remote control.
2
Use О/п/Н /Ж to select a device to lock or unlock.
3
Press OPTIONS on the remote control.
4
Use Î or ï to select [Device lock [ ] kk or [Device unlock [ ] kk , then press OK.
• If device lock is unlocked, [Device lock] kk will be displayed.
If device lock is locked, [ Device unlock] kk will be displayed.
• When device lock is locked, will be displayed at the top right
of the device icons.
5
Enter your PIN (see ‘Setting your PIN’ on page 19).
• Once you have set PIN, PIN input menu does not appear after
the unit is turned on.
Enable or disable RC key forwarding from the home menu
This section describes how to RC key forwarding is enable or disable
specifi ed device.
1
Press MENU on the remote control.
2
Use О/п/Н / Ж to select a device to enable or disable
RC key forwarding.
3
Press OPTIONS on the remote control.
4
Use Î or ï to select [ Enable RC key forwarding [ ] or [Disable RC [
key forwarding], then press OK.
•
If RC key forwarding is set to off, [ Enable RC key forwarding [ ] gg will
be displayed. If RC key forwarding is set to on, [ Disable RC
key forwarding] will be displayed.
• When you set RC key forwarding on, will be displayed at the
top left of the device icons.
Note
• This function is available only when your devices are connected to this unit through
HDMI cables and assigned them from HDMI1 to HDMI4 with [Add new devices] in
the home menu.
6 Use more of your TV
Access TV menus
Menus help you to install channels, change picture and sound settings
then access other features.
Access the home menu
The home menu gives you easy access to connected devices, picture
and sound settings as well as other useful features.
1
Press MENU on the remote control.
Watch TV Browse USB Add new devices
Setup
2
Use О / п / Н / Ж to select and navigate through one of the
following menus.
• [Watch TV] Switches back to the antenna source if another
source is selected.
• [Browse USB] Accesses USB menus.
• [Add new devices] Adds new devices to the home menu.
• [ Setup] Accesses menus that allow you to change picture,
sound and other TV settings.
3
Press OK to confi rm your choice.
4
Press MENU to exit.
Tip
• After selecting [Add new devices], follow the on-screen instructions to select the
correct device and connector.
EN