4 get started, Adjusting the swivel angle, Installing the remote control batteries – Philips LCD TV 46PFL7505D 117cm-46" class Full HD 1080p digital TV with Perfect Pixel HD Engine User Manual

Page 9: Supplied accessories, Mounting base onto tv for 40” and 46, Positioning the tv

Advertising
background image

8

In addition to reading and understanding the safety instructions,

consider the following before positioning your TV :

Ensure that you always have easy access to the AC power cord or

plug to disconnect the TV from the power.

If the TV is mounted on a swivel base, ensure that no strain is

placed on the AC power cord when the TV is swiveled. Strain on

the AC power cord can loosen connections.

The ideal viewing distance for watching TV is three times its screen size.

Position the TV where light does not fall on the screen.

Connect your devices before you position the TV.

Using a Kensington lock

There is a Kensington security slot on the back of the TV. Prevent theft

by looping a Kensington lock between the slot and a permanent object,

such as a heavy table.

55” / 46”

40”

Adjusting the swivel angle

You can adjust the viewing angle of your TV.

Top of the unit

approx.

approx.

15°

15°

approx.

approx.

15°

15°

approx.

approx.

15°

15°

prox.

approx.

o

approx.

15°

15°

Caution

While adjusting the swivel angle of your TV, hold the base fi rmly to prevent the TV from
tipping over and falling down.

Installing the remote control batteries

1

Slide the battery cover off the back of the remote control.

2

Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −

ends of the batteries line up with the markings inside the case.

3

Slide the cover back into position.

Note

Remove the batteries if not using the remote control for an extended period of time.

4 Get started

Supplied accessories

Remote control

2 x AAA, 1.5V batteries

M4 x 10 double sems screw x 4 (available for 40” and 46” only)

AC Power cord

Cable management tie

User manual

Quick Start

Mounting base onto TV for 40” and 46”

Applicable to TVs without mounted bases.

1

x 4

2

Note

To wall mount the TV, refer to the addendum.

If you lose the screws, please purchase M4×10 Philips head screws at your local store.

Positioning the TV

Warning

Do not insert the AC power cord into the power socket outlet before all the
connections are made.

Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.

Before you move the TV, disconnect the cables to prevent breakage.

EN

Advertising
This manual is related to the following products: