Philips Sonicare HealthyWhite Rechargeable sonic toothbrush HX6731-34 3 Modes 2 brush heads Whitening pen - Manual (Page 13)

Clean and White mode
2 minutes of Clean mode, with an additional
30 seconds of White mode to focus on your
visible front teeth.
Note: When Sonicare is used in clinical studies, the
default 2-minute Clean mode must be selected.
However, in whitening/stain reduction studies, the Clean
and White mode must be selected. The handle must
be fully charged and the Easy-start feature must be
deactivated.
Features
Easy-start
- This Sonicare model comes with the Easy-start
feature activated.
- The Easy-start feature gently increases power
over the first 14 brushings to let you get used to
brushing with the Sonicare.
Note: Each of the first 14 brushings must be at least 1
minute in length to move through the Easy-start ramp-
up cycle properly.
Note: When the Clean and White mode is selected, the
Easy-start feature is inactive.
Deactivating or activating the Easy-start
feature
1 Attach your brush head to the handle.
2 Place the handle on the plugged-in charger.
- To deactivate Easy-start:
Press and hold the power on/off button for 2
seconds. You hear 1 beep to indicate that the Easy-
start feature has been deactivated.
ENGLISH 13