Philips 4 HD HIFI SMALL CLOCK VCR - Manual (Page 45)

Real Time Counter Memory 45
• The MEMORY button does not
function when REPEAT PLAY is set
to ON. To turn REPEAT PLAY OFF,
see the Helpful Hints on page 43.
• To erase a Real Time Counter
Memory, press the MEMORY but-
ton until the M disappears from the
screen.
• You may only set the real time
counter to zero at one location at a
time. If you try to set the real time
counter to zero at a second loca-
tion, the previous real time counter
to zero setting will be erased.
Helpful Hints
STOP 1:08PM
TV STEREO CH10
SLP 1 : 23 : 45 HIFI
Real Time Counter Memory
Follow the steps below to reset the real time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Press the STOP button to
stop the tape.
2
Press the STATUS/EXIT button. The status display will
appear on-screen for about five seconds.
3
While the status display is still on-screen, press the CLEAR
button to reset the real time counter to zero.
STOP 1:08 PM
TV STEREO CH10
SLP 0 : 00 : 00 HIFI
4
While the real time counter is still on-screen, press the
MEMORY button so that M appears to the left of the real
time counter on-screen.
STOP 1:08 PM
TV STEREO CH10
SLP M 0 : 00 : 00 HIFI
5
To go to a tape location where the real time counter was
reset to zero, press the REW(ind) button or the F.FWD
button when playback is stopped. When the tape reaches the
point at which the real time counter was reset to zero, the tape
will stop. Press the PLAY button to watch the tape.
1 2 3
4 5 6
7 8 9
0 +100
POWER EJECT
SLOW
PAUSE/STILL
STATUS/EXIT CLEAR
MENU
SPEED
REC/OTR
VCR TV CBL/DSS MUTE
VOLUME
CHANNEL
VAR. SLOW VCR/TV
TIME
SEARCH
VCR PLUS+
/ENTER
JOG&
SHUTTLE
MEMORY
PLAY
REW – +
STOP
F.FWD
5
1
3
4
2