Philips DVD740VR98 User Manual
Page 14
14 Remote Control Setup
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom
of the remote control by pressing the tab, then lifting the
lid.
2
Place two AA batteries inside the battery compart-
ment with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
●
Point the remote control at the DVD/VCR’s remote sensor
(see page 20) when using the remote control to operate the
DVD/VCR. Do not point the remote control at the TV.
●
Do not put objects between the remote control and the
DVD/VCR.
Recycling Guidelines/Battery Safety
●
Your new product and its packaging contain materials that can
be recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly dis-
posed. Your product uses batteries that should not be thrown
away when depleted but should be disposed of as small chemi-
cal waste. Please find out about the local regulations on disposal
of your old product, batteries, and packaging whenever you
replace existing equipment.
●
Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with
alkaline; and
Remove batteries when the unit will not be used for a long
time.
1
2
3
DVD740VR 4/12/02 12:08 PM Page 14