Philips 5.1 Home theater HTB3524 3D Blu-ray WiFi - Manual (Page 38)

18 EN
Picture and video settings
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [TV Display]: Select a picture format
to fit the TV screen.
• [HDMI Video]: Select the resolution of
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
• [HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
• [Picture Settings]: Select pre defined
color settings for the video display.
• [Watch 3D video]: Set HDMI video to
support 3D or 2D video.
• [Closed Caption]: Turn on or off the
display of sound effects in subtitles
(applicable only when a disc and a TV
support this feature).
Note
• If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Night mode]: For quiet listening,
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
• [HDMI Audio]: Set an audio format on
HDMI output.
• [Speaker setup]: Set the volume level
and distance of each speaker to obtain
the best possible surround sound.
• [Default sound settings]: Restore the
sound settings to their default values.
Parental control settings
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Change Password]: Set or change
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
• [Parental control]: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
Display settings
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
HTB3524 _F7_UM_V2.0.indb 18 3/11/2014 1:59:30 PM