Philips 32PFL7694H-12 - Manual (Page 18)

17
• [100Hz Clear LCD] Sets the TV
refresh rate to a maximum of
100Hz to provide superior motion
sharpness, better black level, high
contrast with a fl icker-free, quiet
image and a larger viewing angle.
• [Advanced sharpness] Enables
superior sharpness, especially lines
and contours in the picture.
• [Dynamic contrast] Enhances contrast.
• [Dynamic backlight] Adjusts
brightness of the TV backlight to
match lighting conditions.
• [MPEG artefact reduction]
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
• [Colour enhancement] Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
• [PC mode] Enables picture settings
adjustment when a PC is connected to
the TV via HDMI. If enabled, you can
select [Picture format] > [Unscaled]
which provides maximum detail for
display of PC content.
• [Light sensor] Adjusts settings
dynamically to match lighting conditions.
• [Picture format] Changes the picture
format.
• [Auto format mode] Sets the
picture format to automatically fi ll or
automatically zoom into the screen.
Tip
If • [Auto format mode] is disabled, select
[Picture format] > [Auto format] to enable
the option.
• [Picture shift] Adjusts the position of the
picture.
Note
• [Colour] and [Contrast] settings are also
accessible via the [Picture and sound]
experience bar (see ‘Use the picture and
sound experience bar’ on page 16 ).
6
Press the Navigation buttons and OK to
select and adjust a picture setting.
7
Press BACK to exit.
The following picture settings can be
confi gured. Depending on the format of the
picture source, some picture settings are not
available.
•
[Settings assistant] Use settings assistant
to guide you through the best picture and
sound settings.
• [Contrast] Adjusts the intensity of bright
areas, keeping dark areas unchanged.
• [Brightness] Adjusts the intensity and
details of dark areas.
• [Colour] Adjusts colour saturation.
• [Hue] Compensates colour variations in
NTSC encoded transmissions.
• [Sharpness] Adjusts sharpness in the
image.
• [Noise reduction] Filters and reduces
noise in an image.
• [Tint] Adjusts the colour balance in an
image.
Note
Before you adjust • [Custom tint], select [Tint]
> [Custom], then press OK to enable the
option.
• [Custom tint] Customises tint setting.
• [Pixel Plus HD]/[Pixel Precise
HD]Accesses advanced settings:
•
[Perfect Natural Motion] Reduces
fi eld and line fl icker to display
movement smoothly.
Picture
Settings assistant
Sound S S S
Fea Featu Featu Feat res res
Smart settings
Contr nt t Cont Cont on t t ast ast C
Brigh Brigh Brigh Brigh tness tness tness tness tnes
Colou u u r
Insta llati on Hue
Softw t t t t are u pdate
Noise redu redu d redu edu ti ction ction tion
Tint
Sharp p p p ness
English
EN