Philips 32PFL7694H-12 - Manual (Page 37)

36
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system settings are correct. •
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
The
»
[Setup] menu appears.
3
Press the Navigation buttons to select
[Installation] > [Channel installation]
> [Analogue: Manual installation] >
[System].
4
Press OK.
A list of regional systems appears.
»
5
Press the Navigation buttons to select
your country or region.
6
Press OK to confi rm your choice.
The selected country or region is applied.
»
Step 2 Search and store new TV channels
1
In the [Analogue: Manual installation]
menu, press the Navigation buttons to
select [Find channel].
2
Press OK.
The
»
[Find channel] menu appears.
5 3 8 . 0 0 MHz Done Search next
Access DVB-C and DVB-T channel
networks
This option appears only if your country
supports DVB-C (Digital Video Broadcasting-
Cable). If you have installed both DVB-C and
DVB-T channels, you have to switch to the
respective network to watch channels on that
network.
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
The
»
[Setup] menu appears.
3
Press the Navigation buttons to select
[Installation] > [Channel installation] >
[Antenna or Cable DVB] > [Antenna] or
[Cable].
Select • [Antenna] to access DVB-
T (Digital Video Broadcasting-
Terrestrial) channels.
Select
• [Cable] to access DVB-C
(Digital Video Broadcasting-Cable)
channels.
4
Press OK to confi rm your choice.
5
Press BACK to exit.
The TV switches to the selected
»
network.
EN