Brinkmann PROFESSIONAL STAINLESS STEEL Charcoal Grill - Manual (Page 8)

7
Step 10
Rest lid on the body and align hinge
holes, then thread hood pivot pins
through hood and into grill body. Insert
cotter pins into hood pivot pins and bend
ends out slightly.
Step 11
Attach two air vent covers to the inside of
lid and body. Place air vent cover on the
inside of the unit with the adjustment tab
sticking through one of the air vent holes.
Using 6 x 12mm screw and nut, secure
vent cover to the unit. Do not overtighten
the nut as this will make the vent difficult
to open and close.
Step 12
Insert crank through front of grill body
and into crank bracket. Rotate clockwise
until crank engages charcoal grate.
Cotter Pin
Hood Pivot Pin
6 x 12mm
Phillips Hex Bolt
6 x 5mm Nut
INS_810-3214-S_ProGrill.qxd 5/30/07 4:56 PM Page 8