Philips BDP9000-37E - Manual (Page 52)

EN
9
4 Press-and-hold the 1 and 3.
5 When the TV light flashes two times, release the 1 and 3.
6 Press the stand-by button.
> The universal remote control searches automatically for the signal that turns the TV off.
Each time that the universal remote control transmits a signal, the TV light in the display
flashes.
7 When the TV is turned off, press the stand-by key.
8 Make sure that you can operate the TV with the universal remote control. Refer to
’Overview’ on page 5 for an overview of the functions of the keys and the buttons.
Enjoy
Volume buttons
Depending on the selected mode, the volume buttons are assigned to the TV or the
amplifier: These are the factory settings:
/i
You can change the assignment of the volume controls. For example, you can assign the
volume button in the TV mode to the amplifier:
1 Select the TV mode.
Mode Volume buttons
BD TV
TV TV
AMP Amplifier
SAT TV
DVD TV