Philips 19S4LSB-27 - Manual (Page 8)

6
2. Setting up the monitor
Connecting to your PC
Kensington anti-theft lock
VGA
input
DVI-D input
Audio input (19S4LA/19S4LM)
AC power input
Connect to PC
1. Connect the power cord to the back of
the monitor firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to the
video connector on the back of your
computer.
4. Connect the PC audio cable to the audio
connector on the back of your computer.
5. Plug the power cord of your computer
and your monitor into a nearby outlet.
6. Turn on your computer and monitor. If
the monitor displays an image, installation
is complete.
2.2 Operating the monitor
Front view product description
5 4
3
2 1 7 6
5 4
3
2 1 7 6
Switch monitor’s power on and
off.
Access the OSD menu.
Adjust the OSD menu.
Dim down up to 50% of
brightness level by one touch.
Adjust the brightness level.
Adjust volume of the display
Return to previous OSD level.
SmartImage. There are 6 modes
to be selected: Office, Photo,
Movie, Game, Economy and Off.