Philips HTS6120-37 User Manual

Page 17

Advertising
background image

17

Mount the Home Theater
System

Caution

Risk of personal injury and damage to the

•

product. Allow only qualiÀ ed persons to
mount the product.

1

Ensure all the required cables are

connected to this Home Theater System
and close the rear cover.

2

Attach the supplied knobs to the rear of

this Home Theater System.

3

Turn this Home Theater System over so

that its bottom faces up.

4

Remove the rubber feet by pushing it

towards the back of this Home Theater
System. Repeat the step to remove the
other rubber feet.

Connect USB device

1

Connect the USB device to

USB jack

on this Home Theater System.

Note

This Home Theater System can only play/view

•

MP3, WMA, DivX (Ultra) or JPEG À les that are
stored on such devices.
Press

•

USB to access the content and play the

À les.

Connect power cord

Warning

Risk of product damage! Ensure that the

•

power supply voltage corresponds to the
voltage printed on the back or the underside
of the Home Theater System.

1

Connect the power cord to the power

outlet when all the required connections
are done.

The Home Theater System is ready to

»

be set up for use.

English

EN

Connect

Advertising