Philips HTS6120-37 - Manual (Page 23)

23
Step 3: Clone the conÀ guration
settings
1
Connect another Home Theater System
to the power outlet and turn on the
power.
2
Insert the USB device that contains
the PBS conÀ guration À le to the Home
Theater System.
3
Press USB .
The À le transfer message is displayed •
on the TV.
4
Press OK on Home Theater System
remote control (or ‘ E ’ on PBS green
setup remote control) to start the cloning
process.
Do not remove the USB device •
when cloning is in progress.
Once complete, a message appears
•
indicating that the conÀ guration
settings have been cloned to the
Home Theater System.
Option Description
[Radio
Presets] Enables or disables the functions
of changing the radio presets on
this Home Theater System.
[Clone] Copies the PBS conÀ gurations
(HTS6XXX.dat) to a USB device.
A USB device must be inserted
to this Home Theater System.
The USB minimum storage
capacity is 512KB.
Note
If the • [PBS Setup] is not shown in the [General
Setup] menu, do the following steps to call
out the menu: 1) Press to open the disc
compartment. 2) Press . 3) Press the
Numeric buttons ‘181’ to set PBS menu on.
Step 2: Copy the conÀ guration to a
USB device
1
In disc mode, insert a USB device to the
USB jack on this Home Theater System.
2
Press USB .
3
Press ‘ D ’ on PBS green setup remote
control to access PBS setup menu.
4
Select [Clone] in the menu, then press .
5
Press OK to start copy the conÀ guration
to USB.
Once complete, the PBS •
conÀ guration À le in the USB is
displayed on the TV.
Note
The USB minimum storage capacity is 512KB. •
English
EN
Get star
ted