Philips HX6211-04 - Manual (Page 11)

, To activate Easy-start: Press and hold the power on/off button for
2 seconds. You hear 2 beeps and the battery level indicator flashes
green to indicate that the Easy-start feature has been activated.
, To deactivate Easy-start: Press and hold the power on/off button
for 2 seconds. You hear 1 beep and the battery level indicator
flashes yellow to indicate that the Easy-start feature has been
deactivated.
Note: Each of the first 14 brushings must be at least 1 minute in length to
properly move through the Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare’s effectiveness in removing plaque.
Cleaning
Do not clean the brush head, handle or charger in dishwasher.
Toothbrush handle
1 Remove the brush head and rinse the metal shaft area with warm
water (Fig. 8).
Do not push on the rubber seal on the metal shaft with sharp objects,
as this may cause damage.
2 Use a damp cloth to wipe the entire surface of the handle.
Brush head
1 Rinse the brush head and bristles after each use (Fig. 9).
2 Remove the brush head from the handle and rinse the brush head
connection at least once a week with warm water.
Charger
1 Unplug the charger.
2 Use a damp cloth to wipe the surface of the charger.
ENGLISH 11