Philips HD8964-47 - Manual (Page 84)

82 ENGLISH
ENERGY SAVING
Stand-by
The Saeco full automatic espresso machine is designed for energy saving
proven by the Class A energy label.
After a certain time of inactivity that can be set by the user (see chapter
“Machine Programming”), the machine turns off automatically. If a product
has been brewed the machine performs a rinse cycle.
In stand-by mode, the energy consumption is below 1Wh.
To turn on the machine, press the “ ” button for a few seconds (if the
power button on the back of the machine is set to “I”). If the boiler is cold
the machine performs a rinse cycle.
The machine status can be manually changed to stand-by mode by hold-
ing the STAND-BY button for 3 seconds.
Note:
1 The stand-by mode cannot be activated if the service door is left open.
2 When the stand-by mode is activated, the machine may perform a
rinse cycle. The cycle can be interrupted by pressing the “ ” button.
The machine can be turned on again by:
1 Pressing any button on the control panel.
2 Opening the service door (when closing the door the machine goes
back to stand-by mode).
The red indicator light on the “ ” button fl ashes when the machine is in
stand-by mode.