Brother HL-5280DW - Manual (Page 71)

4. Control Panel
63
1 On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
NETWORK for HL-5270DN users
Submenu Menu Selections Options Descriptions
TCP/IP TCP/IP ENABLE ON
*/OFF
IP ADDRESS= ###.###.###.###
(000.000.000.000)
*
1
Enter the IP address.
SUBNET MASK= ###.###.###.###
(000.000.000.000)
* 1
Enter the Subnet mask.
GATEWAY= ###.###.###.###
(000.000.000.000)
*
Enter the Gateway address.
IP BOOT TRIES # (3)
IP METHOD AUTO
*/STATIC/RARP/BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
APIPA ON
*/OFF Automatically allocates the IP
address from the link-local address
range.
1
IPV6 ON/OFF
*
NETBIOS/IP ON
*/OFF
ENET AUTO
*/100B-FD/100B-HD/
10B-FD
/10B-HD
Chooses Ethernet link mode.
FACTORY RESET
Restores all network settings of the internal print server to default.
The default settings are shown in Bold with an asterisk.