Brother HL-5280DW - Manual (Page 73)

4. Control Panel
65
1 On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
WLAN
(Continued) WIRELESS
(Continued) COMM.MODE AD-HOC
*/INFRASTRUCTURE Shows the current
Communication Mode.
LIST SSID
(Shows a list of available names for the wireless network)
SSID
(Shows SSID [uses a maximum of 32 digits and characters 0-9,
a-z and A-Z in ASCII values])
CHANNEL 1........
11*..14 Chooses the channel you use.
AUTHENTICATION OPEN SYSTEM
*/SHARED
KEY/WPA-PSK/LEAP
Chooses the authentication
methods.
ENCRYPTION NONE
*/WEP/TKIP/AES/CK
IP
Chooses the encryption
methods.
WEP KEY SELECT KEY1
*/KEY2/KEY3/KEY4 Chooses the WEP key you use.
WEP KEY1 SIZE 128(104)BITS
*/64(40)B
ITS
Sets the size of WEP key1.
WEP KEY1 TYPE ASCII
*/HEX Chooses the input type of WEP
key1.
WEP KEY1
(Shows the WEP key [uses a maximum of 5 or 13 digits and
characters 0-9, a-z and A-Z in ASCII values, or uses a maximum
of 10 or 26 digits and characters 0-9 and A-F in HEX values])
WEP KEY2 SIZE
WEP KEY2 TYPE
WEP KEY2
WEP KEY3 SIZE
WEP KEY3 TYPE
WEP KEY3
WEP KEY4 SIZE
WEP KEY4 TYPE
WEP KEY4
PASSPHRASE
USER
PASSWORD
APPLY YES
*/YES&REPORT Applys the wireless settings.
NETBIOS/IP ON
*/OFF
SET
DEFAULT
Restores wireless network settings of the internal print server to default.
FACTORY
RESET
Restores all network settings of the internal print server to default.
NETWORK for HL-5280DW users (Continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The default settings are shown in Bold with an asterisk.