6) attach anti-tip bracket to floor, Warning – Bosch HES7052U User Manual
Page 14
English 12
6. Insert stripped end of white wire into the center lug on top of the ground strap.
Secure the clamping screw.
.
7. Insert stripped end of red wire into the left lug. Secure clamping screw.
8. Insert stripped end of black wire into the right lug. Secure clamping screw.
9. Tighten each clamping screw with the appropriate torque (See table below).
10. Properly secure flexible conduit at knockout panel on range and at supply
side junction box. The wiring is now complete. .
Note: DO NOT plug in range at this time.
6) Attach anti-tip bracket to floor
WARNING
RANGE TIPPING HAZARD
All ranges can tip and injury could result. To prevent accidental tipping of the
range, attach it to the wall, floor or cabinet by installing the Anti-Tip Device sup-
plied.
Figure 17:
Attaching Wire to Lug
Table 3: Appropriate Torque Levels for Aluminum or Copper Wire
Gauge
Torque (in./lbs.)
Torque (Nm)
6
35
3.95
8
25
2.82
Figure 18:
Completed Three Wire Flexible Conduit Connectiog
lug
clamping screw
wire
green ground screw