Philips 27" HDTV monitor TV - Manual (Page 11)

T he HDMI Input Jacks provide
HDMI Inputs at 1080i for
accessories like HD Receivers.
Connect an HD Receiver to
the HDMI Input: Please refer
to your Receiver’s Owner’s
Manual for more detailed
hookup options.
1 If using a Satellite Dish,
Cable signal or Antenna
signal, connect the 75
ohm round cable from a
Satellite Dish to the
SATELLITE IN and/or the
Cable and Antenna signals
to the ANTENNA “A” or
“B” IN on the back of the
HD Receiver.
2 Connect another 75 ohm
round cable from the OUT
TO TV jack on the HD
Receiver to the 75 ohm IN
on the back of the TV.
3 Connect a HDMI cable
from the DVI OUT on the
HD Receiver to the HDMI
Input jack on the back of
the TV.
4 Connect the Audio L(eft)
and R(ight) cables from
the AUDIO Outputs on the
HD Receiver to the AV1
AUDIO Inputs on the back
of the TV.
NOTE: This is not needed if the
HDMI Input jack on the TV is
connected to a HDMI output in
the HD Receiver.
5 With both the HD Receiver
and the television ON,
press the CH + or CH –
button on the remote to
tune to the HDMI Channel
and view the video input
from the HDMI supplied
signal.
HDMI I
NPUT
C
ONNECTION
9
OUT TO TV SATELLITE
IN
DIGITAL AUDIO
OUTPUT
VCR
CONTROL
S-VIDEO
PHONE JACK
VIDEO AUDIO
L
L
R
R
ACCESS CARD
ANTENNA B
IN
ANTENNA A
IN
2
1
1 1
4
3
VOL
Coaxial
Cable Lead-in
from Satellite
Dish
Coaxial
Cable
Lead-in from
Cable Outlet,
Converter Box, or
VHF/UHF
Antenna
Coaxial Cable Lead-
in from Alternate RF
Signal Source
Back of TV