Philips 27" HDTV monitor TV - Manual (Page 8)

AV1 (A
UDIO
/V
IDEO
)
AND
AV2 I
NPUT
C
ONNECTION
6
VOL
Audio and video cables are not sup-
plied with the TV, but are available
from Philips or electronics retailers.
H
ELPFUL
H
INT
Audio In
(Red and
White)
VCR Two
(or accessory device)
(Equipped with Video
and Audio Output
Jacks)
Video In
(Yellow)
Back of VCR
Back of TV
AV 1
Connection
AV2 Connection
T he TV’s audio/video input jacks
are for direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
AV
1 and AV2 Input Jack connections
are shown on this page, but either
one can be connected alone. Follow
the easy steps below to connect your
accessory device to the AV
1 and AV2
IN Jacks located on the back of the
TV.
1 Connect the VIDEO (yellow)
cable to the VIDEO AV
1 IN (or
AV2 IN) jack on the back of the
TV.
2 Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) AV
1 IN (or AV2 in)
jacks on the rear of the TV.
3 Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on
the back of the VCR (either one
or two) or accessory device being
used.
4 Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.
5 Turn the VCR (either one or
two) or accessory device and
the TV ON.
6 Press the CH+ or CH- buttons to
set the TV to its AV1 or AV2 chan-
nel.
7 With either of the VCRs (or
accessory devices) ON and a pre-
recorded tape (CD, DVD, etc.)
inserted, press the PLAY button
to view the tape on the television.
VCR One (or accessory device)
(Equipped with Audio and
Video Output Jacks)