Philips HD8838-47 - Manual (Page 21)

• 18 • • 18 •
Green
Green
Warning: At the beginning,
short spurts of hot water may
come out. Danger of scalding.
• Before dispensing hot water, check
that the following icon is displayed:
When the machine is ready, proceed as
follows:
• Place a container under the dispensing
spout.
• Turn the selector switch clockwise and
set it to the “ position.
• The following icon will be displayed.
HOT WATER DISPENSING
Press the “ ” button to start dis-
pensing hot water.
• Pour the desired amount of hot wa-
ter. To stop the hot water dispensing
press the “
” button.
It may happen that, even
though the selector switch
has been turned, hot water does not
come out and the following icon is di-
splayed. Wait for the warm-up phase
to end in order to obtain a fl ow of hot
water from the dispensing spout.
If the following icon is dis-
played, clean the dispensing
spout. After placing an empty con-
tainer press the “
” button and
wait until the dispensing is fi nished.
Then, hot water may be dispensed.
To reset the machine to normal opera-
tion turn the selector switch counter-
clockwise until it is set to the “ ” posi-
tion.
Green
Orange
Orange