Rinse/selfcleaning cycle – Philips HD8838-47 User Manual

Page 9

Advertising
background image

• 6 •

• 6 •

• Remove the water tank from its place.
• Rinse and fi ll it with fresh water mak-

ing sure that it is not fi lled exceeding
the (MAX) level indicated in the tank.
Put the tank back in its place.

Fill the tank only with fresh,
non-sparkling water. Hot wa-

ter or any other liquid may damage
the tank and/or the machine. Do not
operate the machine if water is not
present: Make sure there is enough
water in the tank.

• Remove the coff ee bean hopper cover.

Note: The hopper may be pro-
vided with different safety

features according to the regula-
tions of the country of use of the
machine.

• Slowly pour the coff ee beans into the

hopper.

Only coffee beans must be
put into the coff ee bean hop-

per. Ground coff ee, instant coff ee or
any other object may damage the
machine.

• Replace the coff ee bean hopper cover.

• Insert the plug into the socket on the

back of the machine.

• Insert the plug of the other end of the

cable into a wall socket with suitable
power voltage.

Orange

Black

• Switch the power button to “I” to turn

the machine on.

• Make sure the selector switch is on “

” position; if necessary, turn it to the
indicated position.

• To turn the machine on simply press the

ON/OFF button.

• The display indicates that the machine

is priming the circuit.

Note: In some cases you may
be requested to manually

prime the circuit. For this operation
see section “Control Panel Display”.

• The display shows the ON/OFF icon.

Orange

This cycle allows rinsing the coff ee circuits
with fresh water.

The cycle is carried out:
• At machine start (with cold boiler)
• After priming the circuit (with cold

boiler)

• During the Stand-by preparation phase

(if a coff ee product has been brewed)

• During the turning off phase after

pressing the ON/OFF button (if a cof-
fee product has been brewed).

A small amount of water will be dis-
pensed to rinse and heat all the machine
components; in this phase this icon is
displayed.

Wait for the cycle to fi nish automatically.
You can stop dispensing by pressing
either the coff ee button and/or the
ON/OFF button.

RINSE/SELFCLEANING CYCLE

Advertising