Philips 20PT5441-37 - Manual (Page 17)

A
UTOMATICALLY
P
ROGRAM 13
Auto Program
Channel 12
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
Install
Language
Tuner Mode
Auto Program
Channel Edit
Auto Program
Channel 13
Auto Program
Channel 14
VOL
2
4
2
4
1 6
3
Y our TV can automatically set itself for
local area (or Cable TV) channels. This
makes it easy for you to select only the TV
stations in your area when the CHANNEL
(+), (–) buttons are pressed.
Note: Make sure the antenna or cable sig-
nal connection has been completed before
AUTO PROGRAM is activated.
1 Press the MENU button on the
remote to show the on-screen
menu.
2 Press the CURSOR UP 3 or
DOWN 4 buttons to scroll
through the on-screen menu until
the word INSTALL is highlighted.
3 Press the CURSOR RIGHT 2
button to display the INSTALL
menu features.
4 Press CURSOR UP 3 or
DOWN 4 buttons to scroll the
Install features until the words
AUTO PROGRAM are highlight-
ed.
5 Press the CURSOR RIGHT 2
button to start the Auto Program
scanning of channels. Auto
Programming will store all available
channels in the TV’s memory then
tune to the lowest available chan-
nel when done.
6 When finished, press the STA-
TUS /EXIT button to remove
the menu from the TV’s screen. When CABLE is selected, channels 1-
125 are available.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.
Helpful Hints