Philips 20PT5441-37 - Manual (Page 5)

B
ASIC
A
NTENNA AND
C
ABLE
C
ONNECTIONS
Y our home’s signal input might come from
a single (75 ohm) round cable, a
Converter Box, or from an antenna. In either
case the connection to the TV is very easy.
1 If your Cable TV signal or
Antenna signal is a round cable
(75 ohm) then you're ready to con-
nect to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires to
the screws on a 300 to 75 ohm
adapter.
If you have a Cable Converter
Box: Connect the Cable TV signal
to the Cable Signal IN(put) plug on
the Converter.
2 Connect the Cable TV cable or
Antenna cable (or 300 to 75 ohm
adapter) to the 75
Ω plug on the TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug
from the Converter to the 75
Ω plug
on the TV.
After using the AutoProgram
Control, press the CH + and – but-
tons to scroll through all the channels
stored in the television’s memory.
H
ELPFUL
H
INT
75 ⍀
75‰
L R S-VIDEO
VIDEO
AUDIO
CVI AV out
Y Pb Pr
AV in
1
Back of TV
Cable signal
coming from
Cable Company
Jack Panel Back of TV
75 ⍀
1
2
75‰
L R S-VIDEO
VIDEO
AUDIO
CVI AV out
Y Pb Pr
AV in
Antenna Connection
300 to 75 Ω
Adapter
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
Twin Lead
Wire
Round Cable
75 Ω
Back of TV
Direct Cable Connection
75 Ω Round
Coaxial Cable
1