Blaupunkt TEV-501 - Manual (Page 10)

19 19
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Fast tape winding
To fast forward the tape,
➮
Press the FFWD button.
To fast rewind the tape,
➮
Press the REW button.
Connecting external sources
(games consoles, DVD players
and television receivers)
You can connect up to two external
video and audio sources to the TEV-501
(e.g. a games console or DVD player),
and use the monitor and loudspeakers
for the output. The TEV-501 has two
separate inputs for video signals and
stereo audio signals. The inputs are
located on the front and back of the TEV-
501. If all the inputs are in use, the TEV-
501 gives priority to the inputs at the
front of the unit.
Connecting a games console/DVD
player to the TEV-501
➮
Use a suitable cable to connect a
games console/DVD player to the
VIDEO IN, AUDIO IN L and
AUDIO IN R inputs at the front or
back of the TEV-501.
To avoid damage to the TEV-501
and the games console, make
absolutely certain that the cable
colours match the jack colours on the
units.
➮
First switch on the games console.
➮
Now switch on the TEV-501.
To enable an external source to output
on the TEV-501,
➮
Press the STOP button.
Connecting an external monitor
You can connect a monitor to the TEV-
501 in order to output to this monitor.
➮
Connect an external monitor or
television to the AV OUT
connection on the TEV-501.
Connecting a television receiver
to the TEV-501
There is a 32-pin connection at the back
of the TEV-501 to allow you to connect
the optionally available TET-01
television receiver. If you want to
purchase a television receiver for the
TEV-501, please contact a Blaupunkt
dealer.
Headphone connection
There are two 3.5 mm headphone
connections at the front of the TEV-501
labelled
HEADPHONE 1 and
HEADPHONE 2. You can connect
headphones to either of these jacks. If
you connect a headphone to the
HEADPHONE 1 jack, the unit’s internal
loudspeakers will be deactivated. If you
only connect up the HEADPHONE 2
jack, sound will be outputted
simultaneously over the internal
loudspeakers.
OPERATING THE TEV-501