Blaupunkt TEV-501 - Manual (Page 9)

18
Operating the TEV-501
Switching the TEV-501 on/off
➮
Press the POWER button to switch
the TEV-501 on/off.
Playing a video cassette
Note
The TEV-501 is designed to play
standard consumer video cassettes of
the VHS variety (Video Home System).
Never try inserting other cassettes other
than VHS cassettes into the TEV-501.
Suitable VHS video cassettes are
labelled with the VHS symbol. Blau-
punkt-Werke cannot accept any liability
for damage that may occur from using
other video cassettes in this unit.
Inserting a video cassette
➮
Carefully insert a video cassette
with its printed side uppermost and
its flap side first into the cassette
compartment of the TEV-501.
Removing a video cassette
➮
With playback stopped, press the
STOP/EJECT button.
Playing a video cassette
➮
To begin playback, press the PLAY
button.
Note
Video cassettes will be played
automatically if their recording protection
mechanism has been activated.
➮
Repeat this procedure for the
passenger seat.
➮
Open the case’s upper lid.
➮
Flip up the monitor.
➮
Open the zip fasteners at the front
of the case. The unit is angled at
around 15
°
. Close the zip fasteners
until the unit is set at an angle that
you find convenient.
Operating the TEV-501 in
buildings
➮
Place the unit on a secure and
level surface.
➮
Open the lower storage
compartment in the TEV-501’s
case, and remove the power
supply unit.
➮
Connect the output of the power
supply unit to the DC 12V input of
the TEV-501.
➮
Connect the mains power cable to
a 220-volt socket.
OPERATING THE TEV-501