Philips US2-PH61159 - Manual (Page 4)

2. Connect an audio cable between the audio output jacks on your video
source and the RF Modulator’s AUDIO IN jacks.
AUDIO IN Jacks
Audio Output
Audio Source
ANT IN TO TV
L R
60Hz/4.5W
IN S-VIDEO
3. Connect the 75-ohm coaxial cables to the RF Modulator using one of
these two (2) options:
Option 1: If your TV is already connected to another VHF input source
(such as cable TV, VCR, etc.):
TO TV
CATV/ANT
VHF
RF Modulato r VCR
ANT IN T m h O 5 7 V T O 75 Ohm
Disconnect
from here
a. Disconnect the current CATV/antenna connection from the 75-ohm
input terminal of your VHF source, and reconnect it to the RF
Modulator’s ANT IN terminal.
b. Then add a 75-ohm coaxial cable connected between the TO TV
terminal of the RF Modulator and the 75-ohm input terminal of your
VHF source.