Connections, Continued – Philips US2-PH61159 User Manual
Page 5
Advertising
75 Ohm
CATV
300 Ohms
VHF
RF Modulato
r
TV
ANT IN
TO TV
Option 2: If your TV is not already connected to another VHF source:
a. Disconnect the current CATV/antenna cable from the 75-ohm input
terminal of your TV, and reconnect it to the RF Modulator’s ANT IN
terminal.
b. Then add a 75-ohm coaxial cable connected between the TO TV
terminal of the RF Modulator and the 75-ohm VHF input terminal on
your TV.
Note: If your TV has only 300-ohm VHF screw terminals, use a 75-ohm-
to-300-ohm matching transformer to complete the connection.
4. Plug the RF Modulator’s power cord into a standard AC outlet.
CONNECTIONS
continued
75 Ohm
75 Ohm
OUT
IN
CATV
VHF
Add this cable
Reconnect
here
RF Modulator
VCR
ANT IN
TO TV
TO TV
Advertising