Philips 740808051 - Manual (Page 26)

PROGRAMMING MACHINE FUNCTIONS
PROGRAMMING
ST
ART
The user can change some machine operating parameters to suit his/her personal needs.
Press the buttons together. Keeping the buttons pressed
down, turn on the machine.
W
AT
ER
HA
RD
NE
SS
RINSING
The hardness of tap water may vary depending on the
region. For this reason, the appliance can be set according
to the water hardness in the place where it is to be used,
expressed on a scale of 1 to 4.
Turn the machine off.
When this function is enabled, the internal machine circuits
will be rinsed immediately after the warming-up phase to
ensure that coffee is prepared with fresh water only.
Rinsing enabled (ON). Press the button to set the
function.
In all new appliances this function has already been enabled
in the factory.
Rinsing disabled (OFF).
Procedure for accessing machine programming mode.
The appliance is factory set on a hardness value of 3*. The
setting should be adjusted according to the level of water
hardness in the local area.
Dip the strip in water for 1
second.
Check how many squares
change colour.
The degree of hardness
will be signalled by the
indicator lights.
Press the button.
Hardness 4
Hardness 3*
Hardness 2
Hardness 1
and
26