6 routervu commands – Black Box LRA005A-R2 User Manual
Page 148
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
148
rip add host_addr seconds [flags]
rip delete host_addr
rip duplicate [{on | off}]
rip merge [{on | off}]
rip netmask add net_addr/net_bits/subnet_bits
rip netmask delete net_addr/net_bits
rip netmask list
rip refuse router_addr
rip request router_addr
rip status
Configure/display RIP Protocol
route
route add dest_addr[/bits] iface router_addr [metric]
route addprivate dest_addr[/bits] iface router_addr [metric]
route add default iface router_addr [metric]
route delete dest_addr[/bits] [iface]
route [-f]
route lookup dest_addr
Configure the routing tables
snmp set community community_name [-p {ro | rw}] [-t {on | off}]
snmp delete community community_name
snmp set acl community_name host_addr [host_addr ...]
snmp delete acl community_name host_addr [host_addr ...]
snmp set authtrap {on | off}
snmp set contact contact_string
snmp set location location_string
snmp status [-c [ community_name ] ]
Configure/display the Simple Network Management Protocol
syslog {on | off}
syslog address host_addr
syslog class class_value
syslog message message_string
syslog priority priority_value
syslog status
Configure/display system logging utility
tcp irtt [milliseconds]
tcp mss [size]
tcp reset tcb_addr
tcp rtt tcb_addr rtt
tcp status [tcb_addr]
tcp window [size]
Configure/display Transmission Control Protocol information
traceroute [-w wait] [-m max_ttl]
Trace the route to a host
[-q nqueries ] host_addr
udp status
Display User Datagram Protocol status
1.6 RouterVu Commands