Black Box LRA005A-R2 - Manual (Page 22)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
22
Place the Async Router AR-5 on a sturdy surface or in a rack, and follow these steps. The steps coincide
with cables in the illustrations:
1. Using either a 10BASE-T or AUI cable, connect your Ethernet LAN to the appropriate
(10BASE-T or AUI) connector.
2. Connect the available modem ports (modem0-modem4) to the desired telephone lines.
These telephone lines must be dedicated and cannot be used for any other purpose
3. Connect the power supply with the power cord. Do not start the Router at this time.
4. Proceed to Chapter 4.