Philips 32RF52S - Manual (Page 24)

24
Y our television comes with an on-screen
clock. During normal operation, the clock
appears on the screen when the STATUS/EXIT
button is pressed or if the TIMER DISPLAY
control is turned ON.
1 Press the MENU button on the
remote control to show the onscreen
menu.
2 Press the CURSOR DOWN once to
highlight FEATURES.
3 Press the CURSOR RIGHT and the
menu will shift to the left. TIMER will be
highlighted.
4 With TIMER selected, press the CUR-
SOR RIGHT again to shift the display
left and highlight the TIME control.
5 Press the CURSOR RIGHT again to
highlight the time indicator area.
6 Press the CURSOR LEFT or RIGHT to
select the position or digit you wish to
enter.
7 Press the CURSOR UP or DOWN to
select the digits for the time. Or press the
NUMBERED buttons to enter the cor-
rect time.
8 Press the CURSOR RIGHT to move to
the AM or PM position.
9 Press the CURSOR UP or DOWN to
set AM or PM.
Press the STATUS/EXIT button to
remove the menu from the screen.
S
ETTING THE
TV C
LOCK
U
SING THE
T
IMER
C
ONTROL
Ⅲ
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
TIME 10:30 AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
FEATURES
FEATURES
TIME 10:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
1
2
7
9
6
10
7,9
3
4
5
6
8
7
Remember, be sure to press 0 first and then
the hour number for single-digit entries.
The TV’s clock settings may be lost when the
TV is unplugged (or when AC power to the set
is interrupted).
H
ELPFUL
H
INT
10
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
NOTE: The TIMER Controls can also be
accessed by pressing the CLOCK button
on the remote control. See lower diagram
on this page.