Philips 32RF52S - Manual (Page 53)

53
Ⅲ
1
2
R
EMOTE
C
ONTROL
VCR S
PECIFIC
B
UTTONS
W hen using the TV remote control with a
VCR, first make certain it is set to con-
trol your VCR (by the REMOTE CODE or
SEARCH method).
1 Slide the TV/VCR/ACC Switch to the
VCR position.
2 Point the top of the remote toward the
front of the VCR (remote sensor win-
dow) when pressing the buttons.
TV/VCR Button
Press while in the VCR mode (the VCR indica-
tor on the front of the unit will light) to view the
playback of a tape. Press again to place in the
TV position (the VCR indicator light will go
off) to view one program while recording anoth-
er program.
VCR Record • Button
Hold the RECORD and PLAY
ᮣ buttons down
to begin a VCR recording.
MENU Button
Press to display the VCR onscreen menu
controls. Also used to make selection within
the menu controls.
Play Button ᮣ
Press to begin playback of a videotape.
Rewind Button ᮤᮤ
Press to rewind tapes. For some VCR’s, the
STOP button may have to be pressed first,
then REWIND. In playback mode, hold
down the button to view the picture moving
rapidly in reverse.
Stop Button ■
Press to stop the motion of a tape in play-
back, rewind, fast forward, and so on.
Power Button
Press to turn the VCR ON and OFF.
TV/VCRACC Swtich
When in the VCR position, the remote is in
the VCR Mode of operation and com-
mands can be sent to the VCR.
Number Buttons
Press buttons for the direct selection of
VCR channels.
Cursor Up/Down/Left/Right
Press to navigate the vcr onscreen cus-
tomer controls.
Pause Button II
Press to temporarily stop the tape during a
playback or recording. Press again to
release Pause.
Fast Forward Button ᮣᮣ
Press to rapidly advance the tape. For some
VCRs, you may need to press the STOP
button first, then the FAST FORWARD
button. In playback mode, hold the button
down to view the picture moving rapidly in
the forward direction.
Channel + and – Buttons
Press to scan up or down through the VCR
channel numbers.
Remember, the VCR buttons on the remote will
not operate your VCR if those features are not
found on your VCR remote control.
NOTE: All VCR functions (particularly
Search, Rewind, Fast Forward, etc.) will oper-
ate the same as with the original VCR remote
control provided with the VCR.
H
ELPFUL
H
INT