Philips AT920-41 - Manual (Page 9)

17 16
ENGLISH
4 Clean the razor after each use (see
chapter ‘Cleaning’).
C
5 Put the Protective Cap on the razor to
protect razor heads.
Wet Shaving
You can also use the razor on a wet face with
shaving foam or gel.
C
1 Apply some water to your skin.
C
2 Apply shaving foam or gel to your skin.
3 Rinse the shaving unit under the tap
to ensure that the shaving unit glides
smoothly over your skin.
4 Press the on/off button once to switch on
the razor.
C
5 Move the shaving heads in circular
movements over your skin.
NOTE: Rinse the razor under the tap regularly to
ensure that it continues to glide smoothly over
your skin.
ENGLISH
6 Turn razor OFF, dry your face and
thoroughly clean the razor after each use
(see chapter ‘Cleaning’).
NOTE: Make sure you rinse all foam or gel off the
razor.
C
7 When razor is thoroughly dry, put the
Protective Cap on the razor to protect
heads.
Trimming
To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.