Charge the battery – Philips DS8400-37 User Manual

Page 10

Advertising
background image

8

EN

Note

•

Before pressing any function button on the remote

control, first select the correct source with the remote

control instead of the main unit.

•

If you are not going to use the remote control for a

long time, remove the battery.

Charge the battery

Caution

•

Risk of product damage! Ensure that the power supply

voltage corresponds to the voltage printed on the

bottom of the unit.

•

Risk of electric shock! When you unplug the AC

adaptor, always pull the plug from the socket. Never

pull the cord.

•

Before connecting the AC adaptor, ensure you have

completed all other connections.

1

Place the unit onto the charge base.

2

Insert the plug of the AC adaptor to the

DC IN socket on the back of the charge

base.

3

Connect one end of the AC power cord

to the AC adaptor.

4

Connect the other end of the AC power

cord to the wall outlet.

Use built-in battery

Note

•

Always bring your product to a professional to remove

the built-in battery.

Caution

•

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

When the battery is fully charged, you can

also operate the unit on built-in rechargeable

battery.

IN

Advertising