Play from bluetooth device, Play from an external device, Charge the ipod/iphone/ipad – Philips DS8400-37 User Manual

Page 12: Pair with bluetooth deivces, Play audio files from bluetooth devices

Advertising
background image

10 EN

»

The connected iPod/iPhone/iPad starts

play.

• To pause/resume play, press

.

• To skip to a track, press fast forward/

backward keys.

• To search during play, press and hold

fast forward/backward keys, then

release to resume normal play.

• To navigate the menu, press MENU,

then press up/down keysto select, and

press OK to confirm.(for iPod and

iPhone only)

Charge the iPod/iPhone/iPad

When the unit is connected to power, the

docked iPod/iPhone/iPad begins to charge.

Play from Bluetooth device

Pair with Bluetooth deivces

1

Press to select Bluetooth source.

»

Paring starts automatically.

»

LED under button on the main unit

flashes rapidly.

2

Turn on Bluetooth function on your device.

3

Search for Bluetooth devices that can pair

with your device.

4

When “PHILIPS DS8400” displays, select it

to start connection.

»

Double beep tone confirmation is

heard and the LED turns on stably if

connection is successful.

»

If the pairing cannot be completed

within 15 minute, LED turns off.

Tip

•

If your Bluetooth device is already paired with DS8400

before, you just need to find out the “PHILIPS DS8400”

on your Bluetooth menu, then confirm the connection.

• To disconnect Bluetooth device

1

Turn off the connected device or move it

beyond the communication range.

»

LED flashes.

• To erase Bluetooth paring information

1

Press and hold for 5 seconds.

»

The unit beeps once after paring

information is cleared successfully.

Play audio files from Bluetooth

devices

Note

•

Make sure the Bluetooth connection between the unit

and the device is active.

• To start play, press

on the remote

control.

• To pause/resume play, press

again.

• To track up/down, press forward/backward

keys.

Play from an external device

With this docking speaker, you can also enjoy

audio from an external device such as an MP3

player.

Note

•

Make sure that no iPod/iPhone/iPad is docked in the

speaker.

1

Press to select audio-in mode.

2

Connect the supplied audio-in cable to:

• the AUDIO IN jack (3.5mm) on the

back of the unit.

• the headphone jack on an external

device.

3

Start to play the device (see the device

user manual).

Advertising