Philips wireless microphone & Bluetooth® speaker AEA7000 for iPad - Manual (Page 13)

11
English
EN
6
Select a song from The Voice: On Stage
and sing along through the wireless
microphone.
7
Use -/+ on the top of the Bluetooth ®
speaker to adjust volume.
Tip
• Always update the app to the latest version.
•
If automatic pairing fails, press and hold on the
speaker for more than 10 seconds to pair the
microphone with the speaker manually.
• If the wireless microphone remains disconnected from
the Bluetooth ® speaker for more than 15 minutes, it
switches to standby mode automatically. To switch it
on again, you need to slide the OFF/ON switch on the
microphone to theOFF position and then slide back to
the ON position.
• You can use controls available on the app to adjust
sound effects.
• If you experience howling or echo, try to increase
the distance between the microphone and speaker
or adjust the angle of the microphone towards the
speaker.
Play from a Bluetooth ®
enabled device
Note
•
The effective operation range between the Bluetooth ®
speaker and your Bluetooth ® enabled device is
approximately 10 meters (30 feet).
•
To pair with a Bluetooth ® enabled mobile device, make
sure that: no iPad is docked; or you have stopped music
play and exited The Voice: On Stage on your docked
iPad.
• To pair with a new mobile device, you can press to
remove the existing Bluetooth ® connection.
•
To play from a Bluetooth ® enabled device, make sure
that you are not playing music from your iPad docked
on the Bluetooth ® speaker.
1
Press on the top of the Bluetooth ®
speaker.
» The Bluetooth ® indicator flashes blue
quickly.
2
Enable Bluetooth ® on your device
that supports A2DP (Advanced Audio
Distribution Profile).