Philips FWD798-37 - Manual (Page 24)

24
English
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– Do not push on the disc tray or put
any object other than disc on the disc
tray. Doing so may cause the system to
malfunction.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
– According to the format requirement
of DVD or VCD, some operations may be
different or restricted.
Playing discs
1
Press STANDBY ON to switch on the system,
and then press DISC to select disc mode.
2
Power on the TV system and set to the correct
Video In channel (See ”Setting the TV set”).
➜
You should see the blue Philips DVD
background screen on the TV set.
3
Press OPEN/CLOSE to open the disc tray and
load a disc respectively in the first two disc trays..
To load the third disc, press DISC CHANGE.
➜
The disc tray will rotate until the empty tray is
ready for loading.
➜ Make sure the disc label is facing up. For
double-sided discs, load the side you want to
play facing down.
Disc Operations
4
Press OPEN•CLOSE to close the disc tray.
➜ “ READING” will be displayed.
➜
In the stop mode, press DISC 1/2/3 on the
remote control repeatedly to select DISC 1,
DISC 2 or DISC 3 cyclically.
● Some discs can play automatically. For discs with
Table Of Contents, a menu may appear on the
TV screen. When the menu is displayed, press
1 / ¡ / 5 / 4 keys to highlight your
selection and press OK to confirm. To select a
play option, press numeric keys (0-9).
➜
If the disc is locked by parental control, you
must enter your four-digital password (See
“Changing the password”).
5
Press
38 to start playback.
For MP3/ DiVX/WMA
●
Load an MP3/ DIVX/ WMA disc in the disc tray.
➜
Press DISC MENU to select menu on/off.
➜
For how to select your desired title in the
stop mode and when the menu is set to on,
please refer to”MP3/ DIVX/ WMA/Picture Disc
Operations”.
Notes:
– Load discs with the label side facing up.
– To ensure good system performance, wait until
disc reading is completed before proceeding.
Using the disc menu
For disc with Table Of Contents, a menu may
appear on the TV screen once you load the disc.
To select a playback feature or item
● Press 1 / ¡ / 5 / 4 or numeric keys
(0-9) on the remote control, then press
38 or
OK to start playback.
To access or remove the menu
● Press DISC MENU on the remote control.
p001-025-FWD798_37_EngA 2006.5.22, 3:36 PM 24