Features and controls – Briggs & Stratton Pressure Washer User Manual

Page 11

Advertising
background image

11

Features and Controls

Read this Operator’s Manual and safety rules before operating your pressure washer.

Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.

E

B

J

H

D

A

K

L

F

N

C

U

P

R

T

A - Fuel Tank — Fill tank with regular unleaded fuel. Always

leave room for fuel expansion.

B - Choke Lever — Prepares a cold engine for starting.

C - Throttle Lever — Sets engine in starting mode for recoil

starter.

D - Air Filter — Protects engine by filtering dust and debris

out of intake air.

E - Recoil Starter — Used for starting the engine manually.

F - Engine Rocker Switch — Set this switch to run (I) before

using recoil starter. Set switch to stop (O) to stop engine.

G - Fuel Valve — Used to turn fuel supply on and off to

engine.

H - Nozzle Extension with Quick Connect — Allows you to

switch between different spray tips and detergent nozzle.

J - Spray Gun — Controls the application of water onto

cleaning surface with trigger device. Includes trigger lock.

K - High Pressure Hose — Connect one end to water pump

and the other end to spray gun.

L - Spray Tips — 0°, 15°, 25° and 40°: for various high

pressure cleaning applications.

M - Turbo Nozzle — Rotates a high pressure stream in a

rapid circular pattern.

N - Pressure Control Knob — Varies pressure of high

pressure spray.

P - High Pressure Outlet — Connection for high pressure

hose.

R - Water Inlet — Connection for garden hose.

S - Pump — Develops high pressure.

T - Automatic Cool Down System — Cycles water through

pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.

U - Oil Fill — Check and add engine oil here.

Items Not Shown:

Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.

Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.

Oil Drain — Drain engine oil here.

Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.

M

S

G

Advertising