InnoMax Softside Air - Manual (Page 4)

*The exception to this step is for owners of the Air-
Cell™ system. The Air-Cell™ features a reversible
latex and Memory-Cell
® overlay which is sized
to fit over the air chambers and cover the Power Edge rail system completely.
7. Place the comfort layer on top of the air
chambers.
This should completely cover the
chambers and drop just inside the Power Edge
Support Rail System. (see DIAGRAM
A1 ).
A1
not over tighten the connector
to prevent damage to the
port. At this point, you are
ready to begin the inflation
process.If your pump has
the “bed fill” feature, depress
that button on either control to
fill the chamber automatically.
If your pump does not have
this feature, press and hold
the “Firm” or “^” button until
the chamber is completely
inflated. On digital inflators, the
reading will be approximately
50mmHg. For analog air
inflators, the pump will begin to slow and create a
sputtering sound. This will signal a full chamber. The
inflators are designed to prevent damage to the
chamber from overfilling. Repeat this process for filling
the opposite side of the bed for a dual air sleep system.
* DO NOT OVER TIGHTEN *
3 4
8. Zip up the cover/pillow top, install new mattress pad and sheets. Enjoy a
great night’s rest.