Hale 11HP Super Chief - Manual (Page 2)

Page 2
Introduction & Applications ................................ 2
Pump Operation .................................................. 3
Maintenance ....................................................... 4
Storage ................................................................ 4
Warnings/Safeguards .......................................... 5
Troubleshooting ................................................... 5
Specifications .......................................... 6
Pump Curve ............................................ 7
Accesories .............................................. 7
Parts list and Diagrams ........................... 8-10
Warranty: Briggs & Stratton: .................. 11
Otterbine ............................... 12
INTRODUCTION
CONGRATULATIONS! You have just purchased the best pump on the market. At Otterbine®/Barebo, Inc. we
are committed to quality products and service. If you have any problems or questions regarding your new pump,
please contact your qualified Otterbine distributor or call us at 800-237-8837.
Your new pump is a rugged, well-tested tool, but it requires some routine care and maintenance. Please read this
manual before operation.
WARRANTY
The Otterbine® pump is covered by a one-year limited warranty. The engine is warranted by Briggs & Stratton.
Both warranties are enclosed, see inside and outside back cover. The enclosed warranty card must be filled
out and returned for your warranty to be valid.
TABLE OF CONTENTS
Revised 4/27/05
NOTICE: Pump is shipped with no oil in the engine. Fill with oil before first use.
(See Page 3, Step 1 for more details)
CAUTION: The 1/8" diameter weep hole in the endcap must be kept clear for
proper priming and operation. During normal operation, there will be a stream of
water coming out of this weep hole.
Hale Model #545-4091-07-0 (National Hose Thread Discharge)
Hale Model #545-4091-08-0 (ISO Thread Discharge)