Hale RSD User Manual
Rsd single stage pump, Operation and service maintenance manual
Advertising
Table of contents
Document Outline
- Hale RSD Single-Stage Pump, p/n: 029-0020-92-0
- NOTICE !
- Contents
- Hale RSD Single-Stage Pump
- 1 Safety Precautions
- 2 Introduction
- 2a Accessories
- 3 Basic Operation
- 4 Preventive Maintenance
- 4.1 Overview
- 4.2 Post Operation
- 4.3 Extreme Conditions
- 4.4 Weekly
- 4.5 Monthly
- 4.6 Annual
- 5 Troubleshooting
- Figure 5-1: Sample, Serial Nameplate
- Figure 5-2: Troubleshooting Chart
- PTO Will Not Engage.
- Pump Loses Prime or Will Not Prime.
- Insufficient Pump Capacity.
- Insufficient Pressure.
- Remote Control Difficult to Operate.
- Engine Speeds Too HIGH for Required Capacity or Pressure.
- Cavitation
- Relief Valve Does Not Relieve Pressure When Relief Valves are Closed.
- Relief Valve Does Not Recover and Return to Original Pressure Setting After Opening Valves.
- Relief Valve Opens When Control Valves are Locked Out.
- Unable to Obtain Proper Setting on Relief Valves.
- Discharge Valves Are Difficult to Operate.
- Water/Moisture in Pump Gearbox.
- Rotation Symptoms.
- 6 Repair
- 6a Mechanical Seal Assembly
- 6b Gearbox Service
- 6c Available Options - Repair
- 7 Installation
- Appendix A: Glossary
- Appendix A-1: Measurements
- Appendix C: Alternate Lubricant Manufacturers
- Appendix C1: Lube and Sealant Specifications
- Appendix D: Hose Friction Loss
- Appendix E: Nozzle Size vs. Pressure
- Appendix F: Cavitation
- Express Warranty
- Drawing Package
- Return HOME Page
- Exit