6 removing the gearbox only, Removal, Figure 6-3: typical rsd gearbox removal – Hale RSD User Manual
Page 76: Removing the gearbox only
Advertising
❑ Corrective Maintenance
76
RSD Series Single-Stage PTO Pumps
p/n: 029-0020-92-0
6.6
REMOVING THE GEARBOX ONLY
Removal
(See Figure 6-3: “Typical RSD Gearbox Removal.”) Also see Figure 6-2:
“RSD Series Single-Stage Pump” on page 73.
Figure 6-3: Typical RSD Gearbox Removal
WARNING !
WHEN REMOVING (UNBOLTING) THE GEARBOX FROM THE PUMP, MAKE
SURE THE PUMP ASSEMBLY WITH INTERCONNECTING MANIFOLDING,
VALVING, ETC. IS ADEQUATELY SUPPORT TO PREVENT THE ASSEMBLY
FROM FALLING OUT OF THE APPARATUS.
1.
Review preceding sections “Before You Begin...,” on page 67. Also see
WARNING ! note found on page 68.
Advertising