Hale RSD - Manual (Page 99)

99 RSD Series Single-Stage PTO Pumps
p/n: 029-0020-92-0
O pt io n M ain te n an ce
❑
6c Available Options - Repair
6C.1 TACHOMETER DRIVE
Figure 6c-1: Tachometer Drive Option
1. Disconnect the tachometer flexible cable from the tachometer drive assembly,
or from the operator panel adapter. (See Figure 6c-1: “Tachometer Drive
Option.”)
2. Remove the tachometer drive assembly from the adapter fitting, being careful
of the flexible shaft as the assembly is removed.
3. Unthread the adapter fitting from the gearbox housing cover.
Installation Notes
(See Figure 6c-1: “Tachometer Drive Option.”)
To install, follow the preceding steps in the reverse order.