Hale RSD - Manual (Page 11)

11 Section 1: Safety Precautions
Hale Products, Inc., Nov. 2005, Rev-A
Saf ety
❑
1 Safety Precautions
IMPORTANT !
HALE SERIES PUMPS ARE DESIGNED FOR OPTIMUM SAFETY OF ITS OPER-
ATORS. FOR ADDED PROTECTION, PLEASE FOLLOW THE SAFETY GUIDE-
LINES LISTED IN THIS SECTION AND ADHERE TO ALL WARNING, DANGER,
CAUTION AND IMPORTANT NOTES FOUND WITHIN THIS MANUAL.
ALL SUPPLIED DOCUMENTATION MUST BE CAREFULLY READ, UNDER-
STOOD AND ADHERED TO STRICTLY BY ALL INSTALLERS AND OPERATORS
BEFORE ATTEMPTING TO INSTALL OR OPERATE THE PUMP.
WHEN DEVELOPING DEPARTMENTAL APPARATUS OPERATING PROCE-
DURES, INCORPORATE THE WARNINGS AND CAUTIONS AS WRITTEN.
Hale is a registered trademark of Hale Products, Incorporated. All other brand and product
names are the trademarks of their respective holders.
1.1 GUIDELINES
NOTICE !
THE PROCEDURES IN THIS MANUAL ARE GENERAL OPERATING PROCE-
DURES. THEY DO NOT REPLACE THE PROCEDURES, POLICIES OR GUIDE-
LINES ESTABLISHED BY THE AUTHORITY HAVING JURISDICTION, NOR DO
THEY REPLACE THE RECOMMENDATIONS AND PROCEDURES PROVIDED
IN THE APPARATUS MANUFACTURER'S MANUAL.
REFER TO THE PROCEDURES PROVIDED BY THE AUTHORITY HAVING
JURISDICTION ON SETTING WHEEL CHOCKS (TO PREVENT ANY MOVE-
MENT OF THE APPARATUS), AS WELL AS LAYOUT AND CONNECTION OF
HOSES, VALVES AND DRAIN COCKS.
❑ Use care when removing the pump assembly from its packaging to pre-
vent personal injury and/or damage to the system.
❑ To fully support the pump assembly, use all mounting bolt holes provided
on the gearbox and/or the pump. See the pump assembly plate drawing,
located at the back of this manual, for additional installation information.