Class1 EZFill Foam Refill - Manual (Page 10)

❑ Description
10 EZFill Installer / User Guide, p/n: 029-0020-82-0
LED Indicators
(See Figure 2-2: ‘Smart-Switch Controller - SPC’ on page 8.)
❑ The FLUSH LED is ON while the system is flushing.
❑ The FLUSH LED is OFF when FLUSH is not active.
“A” Button
Press and Release
Sets the electric valve to the TANK “A”’ position (single tank system).
Note: In a dual tank system, the tank level select relay is first energized to set the
valve to TANK “A.”
LED Indicators
❑ The “A” LED is ON steady when foam TANK “A” is selected.
“B” Button
Press and Release
In a dual tank system, the tank level select relay is first energized to set
the valve to TANK “B.”
LED Indicators
❑ The “B” LED is ON steady when foam TANK “B” is selected.