Fluid Management NSC50 Harbil - Manual (Page 9)

NSC50 Operating & Instruction Manual 9
ASSEMBLY & INSTALLATION
CONNECTING TO THE POWER SOURCE
GROUNDING
In the event of an electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the electric current. The 3-
prong plug, equipped with grounding wire, must be plugged into a 3-slot
receptacle that is properly installed and grounded in accordance with all
local codes and ordinances.
DANGER:
Improper use of the grounding plug can
result in a risk of electric shock.
GROUNDED
OUTLET
GROUNDING
PIN
Figure 5 Grounding Methods
DO NOT connect the grounding wire to a flat-blade terminal. The wire with
the insulation having an outer surface that is green (with or without yellow
stripes) is the grounding wire.
Check with a qualified electrician or serviceman if you are not sure how to
ground this machine. Under no circumstances should you modify the
plug if it does not fit the outlet.
WARNING:
After you have plugged the unit into a
dedicated power line and leveled it, inspect
to be sure that you have removed the
shipping materials.